. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS For details of the method of checking the maintenance 3 - 128 1) The buzzer sounds for or meter lights up for Radiator coolant le approx. 2 seconds, then the monitor approx. 2 seconds.
vel monitor (4) Charge level monit Engine oil pressur Engine oil level mo Air cleaner cloggin or (5) e monitor (6) nitor (7) g monitor (8) perature gauge (9) perature monitor (10) (12) not light up or the buzzer does not Engine coolant tem Engine coolant tem Fuel gauge (11) Fuel level monitor If any monitor does does not sound, there is proba bly a failure in the monitor, so please contact your Komatsu distributor for repairs. 2) After approx. 2 seco nds, the screen will change to the working mode/travel speed display monitor. Next, it screen.
perature gauge (9) perature monitor (10) (12) erature gauge (13) erature monitor (14) will switch to the standard Engine coolant tem Engine coolant tem Fuel gauge (11) Fuel level monitor Hydraulic oil temp Hydraulic oil temp 3) If the hydraulic oil tem lamp (15) stays lig immediately for the ite perature gauge goes out and caution hted up red, perform inspection m which is lighted up red. 4) If the maintenance interval has passed, maintenance lights up for 30 seconds. Press interval monitor (16) Press maintenance switch F maintenance immedia 5 (17), check the item, and carry out tely. interval, see "Mainten in the explanation for ance Selector Switch (PAGE 3-41)" each component.