Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION Unloading bending. selector switch to low speed travel (Lo Press travel speed selector switch (5) to switch the travel speed. The travel speed (Lo, Mi, Hi) is displayed on the travel speed monitor (6). 3 - 182 1. distance from the 2. Apply the trailer br akes securely, then put bl ocks (1) und er the tires to prevent the trailer from moving. ght ramps (2) parallel to Set left and ri to the left and right of cent er (3) of the t railer. installation (4) a maxim um of 15°. If the f the large amount under t he weight o ocks under the ramps to prevent them from 3. Remove the chain s and wire ropes fastenin g the machin 4. Start the engine. up fully.

to FREE position (F). Warm the engine 5. Set the lock lever 6. lamp lights up). 7. Turn auto-deceler ation switch (7) OFF and operate the fuel control dial to set t Each time aut switches OFF J When auto-de auto-decelerati control dial to set t Each time aut he engine speed to low id o-deceleration switch (7 ON J OFF in turn. celeration switch (7) is on monitor (8) goes out. ling. ) is pressed, it turned OFF, the