. OPERATION TROUBLES AND ACTIONS TOWING THE MACHINE WARNING 3 - 198 Serious injury or death cou ld result if a disabled machine is towed incorrectly or if there is a mist ake in the selection or inspection of the wire rope. Always check that the wire rope used for towing has ample st rength for the weight of the machine being towed. Never use a wire rope whic h has cut strands (A), reduced dia meter (B), or kinks (C). There is dang er that the rope may break during t he towing operation. s when handling wire rope. slope. Always wear leather glove Never tow a machine on a During the towing operatio n, never stand between the towin g machine and the machine being tow ed.
Operate the machine slowl y and be careful not to apply any su dden l oad to the wire rope. NOTICE y for this machine is 303,030N (30,900 kg). The maximum towing capacit y for this machine is 303,030N (30, 900 kg). Always carry out towing oper ations within the maximum towing capacity. If the machine sinks in mud and cannot get out unde r its o wn power, or if the drawbar pull of the excavator is being us ed to tow a heavy object, use a w ire rope as shown in the diagra m on the right. Place pieces of wood b etween wire ropes and body to prevent damage to ropes and b ody. Hold the wire rope level and direct it straight to the tra ck frame.
When towing a machine , travel at a speed of less than 1 km/h for a distance of only a fe carrying out repairs. w meters to a place that is suitable for mergencies. itable This is for use only in e