Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING Checking (1) of the monitor panel flashes, used for one year, or air cleaner the monitor panel lights up after the replace outer element (5), inner (4) if it is damaged or if the rubber is 4 - 19 When usin g compressed air , there is danger of dirt f lying and causing per Always we ar protective glas ses, dust mask, or other protective equipment When rem oving the outer ele ment from the air cleane r body, it is dangerous to pull it out by force.

When working in high pl aces or where t he foothold is poo r, be careful not to fall b ecause of the r eaction when pulling out the outer NOTICE an the air cleaner element until the air cleaner clogging monitor on the monitor panel light up. If the element is Do not cle an the air cleaner eaner clogging monito ht up. If the eleme nt is cleaned fr equently before th e air cleaner clogging m onitor light up, the air cleaner will not be able to display its performance fully, and the cleaning effici ency will also go down. stuck to the element will fall inside the inner element.

In addition , during the clean ing operation, more dirt stuck to the element w ill fall inside the inner elem If i nspecti on, cleaning, or m aintenance is carried out with the engin e runni ng, dirt will enter the engin e and cause dama ge to the engine . Always stop the engine before carrying o ut these operations. If air clean clean the ai r cleaner eleme Replacing Replace element, O-ring If the el ement has bee clogging monitor (1) on element has been clea element (6), and O-ring ( Replacin g vacuator valv Replace vacuator valve markedl y deformed.