Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BUCKET SIDE CUTTER, SHROUD WARNING Shroud 4 - 37 I eplacing the bucket side cutters and Set the w ork equipm ent in a stable co ndition, stop the engi ne, then set ock leve r securely t o the LOCK positi As the lo cking pin is knocked out with force, there is danger that the pin may fly o ut. Check t hat there is no on e near the machine. Broken p wear safe ieces may ty glasses, fly during the re gloves, or other p placement operation rotective equipment Side Cutter s unting bolts (2), then remove side cutter (1). Replace Loosen mo unting bo . Replace the side cu tter, bolts, and nuts with n ew parts.

3630 Nm (310 to 370 kgm, o 2,676.2 lbft) Tightening torque for bolts: 3040 to 2,242.2 t 1. Place a bar on th e head of pin (1) , hit the bar with a hammer to out the pin , then remove t REMARK If it cannot be remov ed by this metho d, for safety reaso ns, always contact yo ur Komats have the replacem ent carried out 2. Clean the mount ing face. Fit a n ew shroud (2) in th e adapter, pin (1) pa rtially by hand, then lock it with a hammer to he tooth t