. MAINTENANCE MAINTENANCE PROCEDURE CLEAN AND INSPECT RADIATOR FINS, OIL COOLER FINS, AFTERCOOLER FINS AND CONDENSER FINS WARNING 1. Remove cover (1). 4 - 63 If compressed air, high -pressure water , or steam hits your body directly or dirt is sent flying by the comp ressed air, high-pressure water, or steam, there i s danger of personal inju ry. Always we ar protective glasses, dust mask, and ot her protective equipment. NOTICE When using compresse d air for cleaning, blow it keeping some distance to avoid damaging the fins. Dam age on the fins can cause water leakage and over heating. In a dusty job si te, check the f ins ever y day, regardless of the mainten 2.
Loosen screw (2 ) and pull up net (3). 3. Clean net (3). (it step 8.) Remove 5 bolts 4. make a gap bet ween radiator fins (6) a nd oil cooler fins (7) . 5. Inspect the front after-cooler fins and rear of radiator fin (8) and condenser fin s (6), oil cool s (9) for dirt er fins ( , dust, 7), dry leaves, etc. Blo w them awa y with c ompressed a ir, if any. d air. Steam or water may be used instead o f compresse 6. Check the rubbe r hose. Replace with a new one if t he hose is found to have cr acks or to be hardene d by aging. I n addition, check the hose clamps for looseness.