. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT hydraulic tank to 6 - 12 4. Set the lock lever to LO 5. Loosen eliminat e the internal pr essure in the hydrau 6. Place a container under the filter element to catch the oil. 7. Set a co ntainer in positio n to catch the draine d oil, then remove plug (1) and drain the oi l accumulated in filte r case (2). 8. Turn filt er case (2) to the left, remove it, then take out element (3). he removed parts, then install new element (3). 9. Clean t he removed part s, then install new el Elem Set d hole head Elem ent (3) must be i nstalled facing in the correct direction.
irection (Y) with the holes in it facing up, and insert the in element (3) on the protruding portion inside filter (4). ilter 10. Install n ew O-ring (5) to f ilter case (2), then sc rew filter case (2) into filte r head (4). Whe n the top of filter ca se (2) comes into contact with the filter hea d, tighten it at least a further 1/2 turns. 11. Clean p lug (1), then fit a new O-ring (6) to pl 12. Install p lug (1) to filter c