Komatsu — SPECIFICATIONS

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT in the operation manual the pedal may cause overheating and other 6 - 18 When Using General Atta With the working mode set to P mode or E mode, set the lock pi to FREE position (c) for both th front or rear of the pedal to a . Set the working mode to P mode or E mode. ing mode, see "Working Mode Selector Switch (PAGE 3-25)". When switching the work ing mode, see "Working Mode Selector Switch (PAG . When it is required to cha nge the setting like a flow rate, see "Changing Attachment Mode Se tting (PAGE 3 -52)".

Precautions when using Check that the stop valve Check that the working m For details of the path of t he oil, see "HYDRAULIC CIRCUIT ( PAGE 6-8)". For other precautions rel ated to the handling of attachment, follow the provided by the attachme nt manufacturer to operate the attachment correctly. LONG TERM STORAGE used for a long time, do as follows. OCK condition. top valve piping. CK position. neral attachment installed, operating If t he equipment is not to be Set the stop valve in the L Fit a plug at the tip of the s Set the lock pin at the LO If SPECIFICATIONS Hydraulic specifications 2 liters / min.

sure for service valve cm2, 3,120 PSI) (except B mode) cm2, 3,550 PSI) (except B mode) sure for service valve cm2, 2,490 PSI) (except B mode) cm2, 2,910 PSI) (except B mode) sure for service valve: 21.6 MPa (220 kg/cm2, 3,120 PSI) (B mod sure for service valve: 17.2 MPa (175 kg/cm2, 2,490 PSI) (B mod Max. flow at merge: 275 x Safety valve relief set pres A port: 21.6 MPa (220 kg/ cm2, 3,120 PSI) (except B mode) cm2, 3,550 PSI) (except B mode) B port: 24.5 MPa (250 kg/ Safety valve cracking pres A port: 17.2 MPa (175 kg/ cm2, 2,490 PSI) (except B mode) cm2, 2,910 PSI) (except B mode) B port: 20.1 MPa (205 kg/ Safety valve relief set pres sure for service valve:

21.6 MPa (220 kg/cm 3,120 PSI) (B mod Safety valve cracking pres sure for service valve: 17.2 MPa (175 kg/cm 2,490 PSI) (B mod