. ATTACHMENTS AND OPTIONS HANDLING THE ELECTRIC PRIMING PUMP ATTACHMENTS AND OPTIONS HANDLING THE ELECTRIC PRIMING PUMP position (A). automatically to the original position (N). REMARK specified time (approx. 7 minutes) has passed, lamp (4) automatically goes out and the electric 6 - 20 . Lamp (4) fla shes and the elect ric priming pump While lamp ( 4) is flashing, the el ectric priming pum p is actuated for 30 secon ds and then stops for 10 seconds. This action is t. is repeated unt il lamp (4) goes ou If this switch is turned to the OF F position (B) whe n the lamp is flashing, the lamp will go out an d the electric prim ing pump will stop.
When the la mp is flashing, the electric priming p ump will stop, but this does not indicate any a . priming pum REMARK When there is n o fuel in the fuel sy stem, there is a p ossibility that air entere d the fuel circuit is n ot completely bled by priming once . owing cases applies, tilt the electric priming pump switch to ON position (A) again to activate the pump. as come to a halt due to fuel exhaustion. e or tube has been maintained or replaced. priming pump has been maintained or replaced. If one of the foll electric priming The engine h as come to a halt due to fuel exhau The fuel hos e or tube has been maintained or rep The electric priming pump has been maintained o r replaced. .
When the la mp goes out, the a ir bleed operation is completed . Turn air ble ed valve (2) to the closed position (S