. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING the around the 5. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 3 - 54 Walk-around Checks Before starting the engine , look around and under the mach ine to check for loose nuts and bolts, or leakage o fuel, or coolant, and chec k condition of the work equipment and hydrauli c system. Also ch eck for loose wiring play, and accumulation of dust at places with high temperat ures.
When carrying out check or maintenance work inside the engine hood or dust c over, be sure to ope n them up to the upper and secure them with a st opper. Remove any flammable m aterials from around the battery or eng ine muffler, or other high tempera ture engine parts. Lea of fuel or oil will cause the Komatsu distributor. machine to catch fire. Check carefully , and sure to r epair any abnormalit ies, or please contact If the machine is at an an gle, reposition it level before chec king. Perform the following insp ections and cleaning every day b efore starting engine for the da 1. Check for damage, w ear, play in work equipment, cylin ders, linkage , and hoses.
Check that there are any problem is found, no cracks, excessive wear, or play in the work equipment, cylind ers, linkage, or hose repair it. 2. Remove dirt and dust from around engine, battery and ra Check if there is an engine or radiator. material (dead leaves the battery or high t engine muffler. Remo Check thoroughly if between exhaust muf y dirt or dust accumulated aroun Check also if there is any flam , twigs grass etc.) accumulated a emperature engine parts, such a ve all such dirt or flammable mate there is any dust stuck partic fler (1) and exhaust muffler cover 3. Check for coolant and oil leakage around the engine Check for oil leakage f it.
rom the engine and coolant leaks from the cooling system. If any problem is found, re 4. Check for oil leakage from hydraulic equipment, hydrau Check for oil leakage. If any problem is found, repair th e area where 6. Check for problems in handrails, steps, loose bolts. If any problem is foun d, repair it. Tighten any loose bolt