Komatsu — DURING STORAGE

. OPERATION LONG TERM STORAGE LONG TERM STORAGE in the DURING STORAGE WARNING 3 - 119 BEFORE STORA NOTICE When storing the mach posture shown in the dia gram on the right to protect the c ylinder (To prevent rusting of th When keeping in long -term storage (more than one month), stor e as follows . Clean and wash all parts, then store the machine indoors. If th e machine h as to b e stored outdoors, s elect level ground and cover t he machine with canvas. llecting. r piston rod with grease. Fill the fuel tank. T his prevents moisture from co Lubricate and chan ge the oil before storage. Coat the exposed p ortion of the hydraulic cylinde r piston rod with grease.

Disconnect the neg ative terminals of the battery a nd cover it or r emove it fro m the m achine and store it s eparately. Lock each control l ever and pedal with the lock l ever and lock cover. Set the stop valve t o the LOCK position on machi nes ready for attachment s. Instal l the blin d plugs to t he elbows. Set the selector va position. lve on the machines which can install attachments to the "Crusher or general attachment" tachment" To prevent corrosio n, be sure to fill the cooling sys tem with Sup ercoolant (A F-NAC ) or permanent type antifreeze (density between 3 0% and 68%).

If it is necessary to perfo rm the rust-prevention operation while the mach ine is indoor s, open th e doors and windows to improve ventilation and prevent g as poisoning. During storage, ope rate and move the machine fo r a short dista nce once a month s o that a new film of oil will coat moving parts. At th e same time, also charge the battery. om the hydraulic cylinder rods. When operating the work equipment, wipe off all the grease fr om the hydraulic cy linder r If the machine is eq uipped with an air conditioner , operate the air conditio ner for 3 to 5 minutes once a month to lubricateall parts of check the refrigera the air conditionercompresso r.

Always run the engine at low idl e when doing this. I n addition, nt level twice a year.