. OPERATION TROUBLES AND ACTIONS TOWING THE MACHINE WARNING 3 - 122 Serious injury or death could result if a disabled machine is towed incorrectly or if there is a mistake in the selection or inspection of the wire rope. Always check that the wire rop e used for towing has ample strength for the weight of the machine bein g towed. Never use a wire rope which h as cut strands (A), reduced diameter (B), or kinks (C). There is danger th at the rope may break during the towing operation. en handling wire rope. e. Always wear leather gloves wh Never tow a machine on a slop During the towing operation, n ever stand between the towing machine and the machine being towed.
Operate the machine slowly an d be careful not to apply any sudden l oad to the wire rope. NOTICE r this machine is 5,140 kg (50,400 N). The maximum towing capacity fo r this machine is 5,140 kg (50,400 N). Always carry out towing operatio ns within the maximum towing capacity. If the machine sinks in mu d and cannot get out under its o wn power, or if the drawbar pull of the excavator is being used to tow a heavy object, use a wire r ope as shown in the diagram on the right. Place pieces of wood betw een wire ropes and body to prevent damage to ropes and body . Hold the wire rope level an d direct it straight to the track frame.
When towing a machine, tra vel at a speed of less than 1 km/h for a distance of only a few m carrying out repairs. eters to a place that is suitable for gencies. This is for use only in emer