. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE sprocket the rubber shoe is securely CHANGE STEEL SHOES OR ROAD LINER TO RUBBER SHOES WARNING idler rubber 4 - 36 4. Fit a steel p ipe in the ru bber shoe, the n rotate th again and fit the rubber shoe s ecurely o n the idler. 5. Stop the rot ation, and ch eck th f itted to the sprocket and idler. 6. Adjust the te nsion of the rubbe r shoe. RUBBER SHOE TENSION (PAGE 4-32)". For details, see "CHECK AND ADJUST RUBBER SHOE 7. Check that t he track tension is correct a nd that the rubber shoe is correctly meshed o n the sprocket and idler t hen lower t he machine t o the ground.
Whe n charging fro m the steel sh oe or ro ad liner to the rubber shoe, when changing from the rubber sh oe to the steel shoe or road liner, it is necessa ry to remove a nd adju st the idle r cushion, s o contac t your Komatsu distributor to h ave the change carried out. Changing from Steel Shoes or Road Liners to Rubber Shoes 1. 2. 1. Remove idl mov guard (2). 2. Remove the shoe. Changing from Rubber Shoes to Steel Shoes or Road Liners 1. Remove the rubber shoe and i nstall the steel shoe or road liner 2. I nstall idler g uard (2) wit h idler guard mo unting bol ts (1) .