Komatsu — WASH WASHABLE FLOOR

. MAINTENANCE MAINTENANCE PROCEDURE WARNING 4 - 46 WASH WASHABL With the washable fl oor, it is possible to flus h out the dirt on the c ab floor directly with wate When setting the m achine at an angle, use strong blocks to stabilize th e machine and be extremely careful when carrying out th e operation. If t he control levers are touched by mistake , the machine may suddenly move, and this may lead to a serious accident. Always se t the lock lever se curely to the LOC K positio n before s tanding up fro m the NOTICE While cleaning the cab floor, take care so t hat the c onnector, air conditione r main body and filters may n ot be splashed with water Method of Washing 1.

Set the machine For details, see "Method of Setting Machine at A ngle (PAGE 4-47)" 2. Swing the upper structure slowly so that water dr ain holes (1) n the cab floor a re at a low position. 3. Lower the work equipment to the ground and set the machine n a stable condi 4. Set the lock leve r to the LOCK p osition a nd stop 5. Remove the floo r mat. 6. Flush out the dir t on the floor directly with water t hrough water drain hole (1). the washing operation, install the floor mat. 7. After completing the washing operation, install th e floor