Komatsu — CHECK LEVEL OF BATTERY ELECTROLYTE

. MAINTENANCE MAINTENANCE PROCEDURE of the UPPER 4 - 56 When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossib le to check the ele ctrolyte level fro LEVEL line on the side of the batt ery, check as foll Open the e ngine hood and loc k it securely with the hood support (See "ENG INE HOOD (PAGE Open the b attery inspection c over and lock it in position s ecurely with the cover su pport lever. (See "BAT TERY INSPECTIO N COVER (PAGE Remove th e seat installed on top of the battery Remove c ap (1) on the top o port, and check f the battery, loo water filler the electrolyte s urface.

If electrolyte does not reach th e sleeve, add dis tilled wate r s that the lev el reaches the botto m of the sleeve (U PPER LEVE line) withou Us e the diagra m below for referen ce, and check if t he electrolyte reaches the bottom o f the sleeve After addin g distilled water, tig hten cap (1) secu REMARK If distilled wate r is added to above the bottom of the sleeve, use a syringe to lower the level to the bottom of the If d e sleeve, use sleeve. Neutral ize the removed flu id with baking so da (sodium bicarbonate), then flush it away with a large amount of water or con sult your Komatsu distributor or batt ery maker .

When it is Possible to Use Indicator to Check Electrolyte Leve l If it is possible to use an indicator to check the elec trolyte level, f ollo w the instructions