Komatsu — CLEAN, CHECK RADIATOR FINS, OIL COOLER FINS AND CONDENSER FINS

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN, CHECK RADIATOR FINS, OIL COOLER FINS AND CONDENSER FINS WARNING 4. Clean net (2), put it back to the original position and fix it with screw s (1). 4 - 66 If compresse d air, high-pressure wat er, or steam hit your body directly, or the y cause dirt or dust to be bl own up, there is a hazard o f serious inj ury. Always use safety glasses, dust mask, or o ther protective NOTICE e compressed air, keep a distance from air nozzle, to prevents damage to the fins. When use th e compressed air, keep a distance from air nozzl e, to prevents d T o prevent d amage to the fins, apply compressed air from an d appropriate d istance.

Damaged fins ma y cause water leakage or overheating. In a dusty site, check th e fins daily, irrespective of the maintenance interval. Net - Clean (I f equipped 1. Open th e engine hood and lo ck it securely with the hood suppor (See "E NGINE HOOD (PAG 2. Open th e battery inspection cover and lock it in po sition securel y with the cover support (See "B ATTERY INSPECTIO N COVER (PAGE 3- 3. Remov e screws (1) and take Fins - Clean e engine hood and lock it securely with the hood support lever. NGINE HOOD (PAGE 3-32)".) e battery inspection cover and lock it in position securely with the cover support lever. ATTERY INSPECTION COVER (PAGE 3-34)".) e condenser mounting bolts (1).

2 condenser mounting bolts (2) on the inside, then e front of condenser (3) to the left. chines equippedwith a net, remove the net. For details, t - Clean (PAGE 4-66)". mpressed air to blow off the mud, dirt, or leaves g radiator fins (5), oil cooler fins (6), and condenser fins possible to use steam or water in place of compressed 1. 2. 3. 4. 5. 6. 1. Open th e engine hood and lo ck it securely with the hood suppor (See "E NGINE HOOD (PAG 2. Open th e battery inspection cover and lock it in po sition securel y with the cover support (See "B ATTERY INSPECTIO N COVER (PAGE 3- 3.

Remov e condenser mountin Loosen open th 2 condenser mounti e front of condenser ( For ma see "Ne chines equippedwith a t - Clean (PAGE 4-6 Use co cloggin mpressed air to blo g radiator fins (5), oil c w off the mud, dirt, ooler fins (6), and con or leaves denser fins (3). It is also possible to use stea m or water in place of c ompressed air.