. MAINTENANCE MAINTENANCE PROCEDURE (2 bolts) on the top of and grease is milky white. If it is milky change the grease. Please The total amount of grease is 5.5 liters (5 kg) gal, (11.03 lb)]. 4 - 68 LUBRICATE SWING CIRCLE 1. Lower the wo rk equipment to the ground. 2. Using a gre ase pump, pum p in grease fittings show n by arrows. (2 3. After greasin g, wipe off any old grease th at was pushed out CHECK SWING PINION GREASE LEVEL, ADD GREASE Prepare a sca le. (1) to remove bolt (2). r (3) by pull it down. 1. Loosen bolts (1) to remove b 2. Detach cove r (3) by pull it do 3. remove cove 4. Check that g 5. Check if the necessary t Komatsu dist the revolving white, is your [1.45 US 6.
Install greas e filler cover (4) and cover (3