. ATTACHMENTS AND OPTIONS BUCKET WITH HOOK BUCKET WITH HOOK distributor. PROHIBITED OPERATIONS 6 - 4 HOOK CONDI Check that there is no damage to the hook , stopper, or ho ok mount. If there is any problem , contact your K omatsu Operations with C are d the following loads when carrying out lifting d arm is installed: 400 kg (882 lb) is installed: 300 kg (662 lb) if the load sways excessively. Lower the engine Do not excee operations. When standar When long arm It is dangerous speed and ope The swing spe mobile crane. surrounding ar Check that the rate the control levers sl ed of this machine is 3 to Be particularly caref ea is safe when operatin re is no damage to the h owly.
4 times the speed of a ul to check that the g the swing. ook, stopper, and hook mount. If any distributor. problem is found, please contact your Komatsu e machine while lifting a load. the operating posture, there is danger that the omatsu Never travel th e machine while lifting a Depending on the operating posture, t wire or pulley m ay come off from the hoo k. To avoid the se parts from coming of f, pay careful attention to the angle of th e hook. In addition, do not allow any person to c ome under or in t he area around a raise d load. If the bucket w ith hook is turned and us ed for operation s, it will hit the arm duri ng dumping operations, be careful when using it.
If a hook is t distributor. o be installed, please consult your Komatsu omatsu