Komatsu — SAFETY RULES FOR STARTING ENGINE

. SAFETY SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION 2 - 20 STARTING ENGINE If t here is a warning tag hanging from the work equipment co lever, do not start the en gine or touch the levers . CHECKS BEFORE STAR Carry out the following c hecks before starting th e engine at th e beginning of the Remove all dirt from t he surface of the windo w glass to en sure a good view.

Remove all dirt from t he surface of the lens o f the working lamps, and c heck that they ligh Check the coolant lev el, fuel level, and oil leve l in engine oil pan, check f or clogging of the a ir cleaner, and check for damage to the ele Adjust the operator's s eat to a position where i t is easy to ca rry out operations, and check th at there is no damage or wear to the seat be lt or mounting clamps.

Check that the gauge s work properly, check th e angle of the lights and w orkin g lamps, and check that the contro levers are all at the n Before starting the en gine, check that the loc k lever is at th Adjust the angle of the rearview mirror so that viewed from t he operator's seat, the rear lowe r part of the machine (whose view is usuall y blocked by the engine hood) can be clearly seen . For t his adjustme nt, see the section of "Rearview Mirrors (PA GE 3-65)" in this manu Check that there are no persons or obstacles above, below , or in the ar ea around the mac SAFETY RULES FOR ST ARTING ENGINE machine only while seated.

Start and operate the machine only while sea Do not attempt to star t the engine by short-circuiting the eng ine starting c ircuit . Such an act may cause a serious bodily injury or fire. ine, sound the horn as a warning. apart from the operator to ride on the machine. When starting the eng ine, sound the horn as Do not allow anyone apart from the operator t o ride on the