Komatsu — SAFETY RULES FOR CHANGING MACHINE DIRECTIONS

. SAFETY SAFETY MACHINE OPERATION OPERATION on the operator's door and be in the that the forward to avoid 2 - 22 CHECKS BEFORE OPERA TION ecks, move the machine to a wide area where there are no obstructions, and operate e near the machine. belt. When carrying out the ch slowly. Do not allow anyon Always fasten your seat Check that the moveme nt of the machine matches the display o n the control pattern c ard. If it does not match replace it immediately w ith the correct control pattern c ard. em and swing system.

Check the operation of the work equipment, traval syst em and swing Check for any problem i n the sound of the machine, vib ration, heat, smell, or gauges; c heck also that the re is no leakage of oil or fuel. carry out repairs immediately. If any problem is found, SAFETY RULES FOR CHANGING MACHINE DIRECTIONS Always operate the machine only when seated. Do not allow anyone apart from the operator to ride machine. Check that the travel alarm works properly. Always lock the door and windows of the op compartment in position (open or closed). On jobsites where there is a hazard of flying objects or of entering the operator's compartment, check that the d windows are securely closed.

If there is an area to the rear of the machine which ca Always operate the mac Do not allow anyone a machine. Check that the travel al Always lock the doo compartment in position On jobsites where there is a hazard of flying objects or of entering the operator's compartment, check that the d osed. e rear of the machine which ca windows are securely cl If there is an area to th seen, position a signal p erson. Take special care not to machines or people wh en turning or swinging the mach Before travelling, sound the horn to warn people in the Before travelling, chec k again that there is no one hat there are no obstacles.

surrounding area, and t Before traveling, posit ion the upper structure so t sprocket is at the rear o f the operator's cab. If the sproc the front of the operator' s cab, the machine makes a mo reverse to the control l ever movement (for example, becomes reverse, and l eft becomes right). Be careful nt of the machine. such a reverse moveme