Komatsu — WELDING WORKS

. SAFETY SAFETY MAINTENANCE INFORMATION 2 - 36 ATTACHMENTS Appoint a leader before starting removal or installation operations for attachments. Place attachments that have been removed from the machine in a stable condition so that t prevent unauthorized perso hey do not fall. And take steps to ns from entering the storage area. WORK UNDER THE MACHINE If it is necessary to go under the work equipment or the machine to carry out service and equipment and machine sec enough to support the we machine.

maintenance, support the work urely with blocks and stands strong ight of the work equipment and It is extremely dangerous to work under the machine if the track shoes are lifted off the gro only with the work equipm touched by accident, or t hydraulic piping, the work suddenly drop. This is extre the work equipment or the m und and the machine is supported ent. If any of the control levers is here is damage occurring to the equipment or the machine will mely dangerous. Never work under achine. NOISE If the noise from the machine i s too loud, it may cause temporary or permanent h earing p roblems.

When carrying out maintenance of the engine and you are exposed to noise for long period s of ti me, wea r ear covers or ear plugs while working. WHEN USING HAMMER When using a hammer, pins m ay fly out or metal particles may be scattered. This may lead to se rious injury. Always do as follows. If hard metal parts such as p ins, bucket teeth, cutting edges, or bearings are hit with a ham might be scattered and c glasses and gloves. mer, there is a hazard that pieces ause injury. Always wear safety When hitting pins or bucket teeth, there is a hazard that broken pieces might be sent flying a area. Always check that the nd injure people in the surrounding re is no one in the surroundingarea.

There is a hazard that the p in hit with strong force may fly out ounding area. and injure people in the surr WELDING WORKS Welding operations must alway s be carried out by a qualified welde r and in a place equippe d with proper eq uipment There is a hazard of gas, fire, o r electrocution when carrying out welding, so neve r allow a ny unqualified p ersonne to carry out welding.