Komatsu — PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS

. SAFETY SAFETY MAINTENANCE INFORMATION Obey appropriate laws and regulations when disposing of harmful objects such as oil, fuel, coolant, solvent, filters, and batteries. Never touch refrigerant. is 2 - 38 SAFETY HANDLING HIGH-PRE SSURE HOSES If oil or fuel leaks from high- pressure hoses, it may cause fire or defec tive operation , which may lead to s injury. If any loose bolts are stop operations immediatel found, stop work and tighten to the specifie d torque. If an y damag ed hoses are f y and contact your Komatsu distributor. following problems are found. ulic fitting. xposed reinforcement wire layer. . e portion. in covering.

Replace the hose if any of the Damaged or leaking hydra Frayed or cut covering or e Covering swollen in places Twisted or crushed movabl Foreign material embedded WASTE MATERIALS To prevent pollution, pay care ful attention to the method of disposing of waste materia Always put oil drained from drain oil directly onto the system, rivers, the sea, or l AIR CONDITIONER MAINTENA (If equipped) If air conditioner refrigerant get s into your eyes, it may cause blindness; if i t touches your skin, it m ay cause fro COMPRESSED AIR When carrying out cleaning with compressed air, there is a hazard of serious injury caused by flying parti When using compressed ai r to clean elements or the radiator, always wear safety glasses, dust mask, g and other protective equipm ent.

PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS To ensure that the machine can be operated in safety for long periods o f time, always carry out the periodic s of oil and inspection and ma replacement of hoses, seat Replacement of critical part intenance. To further increase the safety, be particularly careful t o carry out pe belt, and other parts with a close relation t o safety. E 4-13). s: See SAFETY CRITICAL PARTS (PAG The material of these compo nents naturally changes over time, and rep eated use cau ses deterioration,wea fatigue.

As a result, there i difficult to judge the remaini so always replace them at t s a hazard that these components may fa il and cause s erious in jury or death ng life of these components from external inspection or the feeli ng when oper he specified interval. Replace or repair safety-crit ical parts if any defect is found, even when they have no t reache d the time spe interval.