Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION DETAILED CONTROLS AND GAUGES CONTROL LEVERS AND PEDALS (1) (2) (3) Lock lever Left work equipment control lever Right work equipment control lever (4) (5) Blade control lever (blade specification) Travel levers (with pedals) Lock Lever WARNING moves. REMARK The engine does not start, if the lock lever is not in the LOCK 3 - 20 When leaving the operator's compartment, set the lock lever securely to the LOCK position.

If the lock lever is not at the LOCK position and t he control levers are touche d by mistake, it may lead to serious personal inju Check that th e condition of the lever is as When pulling the lock lever up, be careful When pushin g the lock lever down, be car eful not to touch the work equipment control leve This lever (1) i s a locking device for lock equipment and attachments, swing and The lever is pu t to the LOCK position, w This lock lever is of a hydraulic locking t LOCK position, the work equipment cont lever can be m oved, but neither machin position. Make sure first that the lock lev and then turn t he engine starting switch.