. OPERATION DETAILED CONTROLS AND GAUGES Blade Control Lever Travel Levers WARNING 3 - 22 (Only m achines with blade s This lev er (4) is used to cont (a): LO (b): RAI Do no t put your foot on the pe dal unless the machine i s traveling. If y ou leave move foot o the pe your foot on the pedal and press it by mistake, the machine will suddenly, and this may lead to a serious accident. Do not re st a n the pedal except whe n traveling or steering th e machine, using dal. If the t rack frame is facing the rear, the direction of trav el operations will be rev When front o (If spr ersed. operating the travel lev ers, check if the track fr ame is facing the r the rear.
the track frame is facing the front.) ocket (A) is at the rear, the track frame is facing the Take g ood care when travelin g or steering the machine , using the pedal. Use this lever (5) to change t he direction of travel b etwee n forward and rev erse. ( ): Pedal oper ation pushed forward s angled forward) pulled back angled back) ps (a) FORWARD: This lever is (This pedal i s angled forward) (b) REVERSE: This lever is (The pedal is N (Neut ral): The machine sto REMARK Machine s equipped with trav el alarm (if equipped) If the lev er is shifted to the FO RWARD or REVERS E position from the Neu tral position, the alar m sounds to warn that the machine is starting