hitachi — Engine Control

SYSTEM / Control System Auto-Idle Control Purpose: Reduces the engine speed when all the con- trol levers are in neutral in order to reduce fuel consumption and noise level. Operation: 1. Approx. 3.5 seconds after the control lever is turned to neutral with the auto-idle switch ON, MC sends the signals equivalent to the auto-idle speed to ECM by using CAN communication. 2. ECM changes the engine speed into the auto-idle speed. 3. As soon as either control lever is moved (pressure sensors (travel, front attachment): ON), MC re- turns the signals sending to ECM into those equivalent to the target engine speed set by the engine control dial. 4.

ECM returns the engine speed into the original engine speed. Auto-Idle Deactivation Requirements: Control Lever: Operated (pressure sensor (travel or front attachment): ON) Power Mode Switch: When the E mode is changed to P mode or P mode is changed to E mode Engine Control Dial: When the engine speed is changed Engine speed is reduced to the auto-idle speed after 3.5 seconds. Engine Speed Fast Idle Auto-Idle Speed 1200 min -1 Engine Control Dial Position Slow Idle Fast Idle NOTE: Auto-idle speed can be adjusted by Dr. ZX. T2-2-14