hitachi — Pump Control

SYSTEM / Control System Travel Torque-Up Control Purpose: Effectively controls during single travel op- eration. When travel operation is made with the engine running at slow speed, normally, the hydraulic pump delivers pressure oil at the flow rate corresponding to point A on the P-Q curve illustrated to the right. Therefore, if any difference exists between pump 1 and pump 2 flow rate, the machine will mistrack. In order to prevent mistracking, the pump P-Q curve is raised so that, when traveling the machine with the engine running at slow speed, the pump delivers pressure oil at the flow rate corresponding to point B (maximum flow rate).

When travel operation is made with the en- gine running at fast speed, the pump P-Q curve is raised in order to improve travel function. Operation: 1. When the engine speed set by the engine control dial is slow, MC processes signals from the travel pressure sensor, and pump 1 and 2 delivery pressure sensors, and sends the signals to torque control solenoid valve. 2. The torque control solenoid valve delivers pilot pressure corresponding to the received signals to the regulator and increases pump delivery flow rate. B A Increased Torque P-Q Curve Normal P-Q Curve T2-2-30 Q Flow Rate Pressure P