hitachi — Valve Control

SYSTEM / Control System Digging Regenerative Control Purpose: Increases arm roll-in speed when operating digging (boom raise, arm roll-in and bucket roll-in). Operation: 1. MC activates solenoid valve unit (SF) when the signals from pump 1, 2 delivery pressure sensors, arm roll-in pressure sensor and boom raise pressure sensor meet the following conditions. 2. When solenoid valve unit (SF) is activated, pilot pressure shifts the digging regenerative valve. 3. Pressure oil in boom cylinder rod side is combined with that from pump 2 and flows to the arm 1 spool. 4. Pressure oil from the arm 1 spool is combined with that from the arm 2 spool and flows to the arm cylinder bottom side.

Therefore, arm roll-in speed increases. Condition: Pump 1, 2 Delivery Pressure Sensors: High pressure (Reference: 22 MPa (224 kgf/cm 2 , 3200 psi) or more) Arm Roll-In Pressure Sensor: Specified pressure or higher (Reference: 2.7 MPa (28 kgf/cm 2 , 393 psi) or more) T2-2-50