SYSTEM / Control System Secondary Crusher Control (Optional) IMPORTANT: Secondary crusher 1 is set at secondary crusher 1 of attachment mode in monitor unit when the machine is carried out. When secondary crusher 2 to 5 is used, set the setting by using Dr. ZX. Purpose: Increases operating speed of the secondary crusher. Reduces flow rate through the auxiliary spool and improve arm, boom, swing or travel operation during combined operation of arm roll-out, arm roll-out+ boom raise, swing or travel and secondary crusher. Operation: 1. When selecting secondary crusher 1 in the monitor unit, MC drives the auxiliary flow combining solenoid valve. 2.
When operating the secondary crusher, pressure oil from the pilot valve flows through the auxiliary flow combining solenoid valve and shifts the bypass shut-out valve and auxiliary flow combiner valve. 3. As the neutral circuit in 4-spool side is blocked by the bypass shut-out valve, pressure oil from pump 1 through the auxiliary flow combiner valve is combined with pressure oil from pump 2 so that combined pressure oil is supplied to the auxiliary spool. Therefore, operating speed of the secondary crusher increases. 4. Flow rate of the auxiliary flow rate control solenoid valve can be adjusted finely in the monitor unit. During Combined Operation Operation: 1.
When the following conditions exist, MC drives the auxiliary flow rate control solenoid valve MC controls restricted flow rate of the auxiliary flow rate control solenoid valve and reduces pressure oil which flows to the secondary crusher through the auxiliary spool from pump 2. 2. As pressure oil which flows to arm roll-out, arm roll-out+ boom raise, swing or travel from pump 2 increases, arm roll-out, arm roll-out+ boom raise, swing or travel operation is improved. Condition: Auxiliary Pressure Sensor: Output ting signal Arm Roll-Out Pressure Sensor: Outputting signal Auxiliary Pressure Sensor: Outputting signal Arm Roll-Out and Boom Raise Pressure Sensors:
Outputting signal Auxiliary Pressure Sensor: Outputting signal Swing Pressure Sensor: Outputting signal Auxiliary Pressure Sensor: Putputting signal Travel Pressure Seonsor: Outputting signal T1V5-05-01-024 T2-2-58