SYSTEM / Control System Primary Crusher Control (Optional) IMPORTANT: Crusher 1 is set at crusher 1 of attachment mode in monitor unit when the machine is carried out. When primary crusher 2 to 5 is used, set the setting by using Dr. ZX. Purpose: Increases operating speed of the primary crusher. Reduces flow rate through the auxiliary spool and improve arm, boom, swing or travel operation during combined operation of arm roll-out, arm roll-out+ boom raise, swing or travel and primary crusher. Operation: 1. When selecting crusher 1 in the monitor unit, MC drives the auxiliary flow combining solenoid valve. 2.
When operating the primary crusher, pressure oil from the pilot valve flows through the auxiliary flow combining solenoid valve and shifts the bypass shut-out valve and auxiliary flow combiner valve. 3. As the neutral circuit in 4-spool side is blocked by the bypass shut-out valve, pressure oil from pump 1 through the auxiliary flow combiner valve is combined with pressure oil from pump 2 so that combined pressure oil is supplied to the auxiliary spool. Therefore, operating speed of the primary crusher increases. 4. Flow rate of the auxiliary flow rate control solenoid valve can be adjusted finely in the monitor unit. During Combined Operation Operation: 1.
When the following conditions exist, MC drives the auxiliary flow rate control solenoid valve. MC controls restricted flow rate of the auxiliary flow rate control solenoid valve and reduces pressure oil which flows to the primary crusher through the auxiliary spool from pump 2. 2. As the primary crusher is heavier than the secondary crusher, restricted flow rate increases of the auxiliary flow rate control valve and gives priority to arm roll-out or arm roll-out+ boom raise during combined operation of arm roll-out or arm roll-out+ boom raise and primary crusher. Condition: Auxiliary Pressure Sensor: Outputting signal Arm Roll-Out Pressure Sensor:
Outputting signal Auxiliary Pressure Sensor Outputting signal Arm Roll-Out and Boom Raise Pressure Sensors: Outputting signal Auxiliary Pressure Sensor: Outputting signal Swing Pressure Sensor: Outputting signal Auxiliary Pressure Sensor: Outputting signal Travel Pressure Seonsor: Outputting signal T1V5-05-01-113 T2-2-60