SYSTEM / ECM System Fuel Injection Timing Control Purpose: Calculates the best fuel injection timing. Operation: 1. ECM calculates the fuel injection timing according to engine speed and fuel injection amount. 2. ECM controls the two-way valve in injector by turning ON/OFF according to fuel injection timing. Fuel Injection Rate Control Purpose: Improves combustion in the engine cylinder. Operation: 1. The injector injects small amount of fuel (pilot injection) first and ignites. 2. After igniting, the injector injects fuel (main injection). ECM controls fuel injection timing and fuel injection amount by turning the two-way valve in injector ON/OFF. Fuel Injection 1.
The nozzle in injector is always pressured. 2. When turning the electromagnetic coil in two-way valve ON, high-pressure fuel in the control chamber returns to the fuel tank through orifice 1. 3. Therefore, the hydraulic pressure piston is raised and the nozzle opens so that the injection starts. 4. When turning the electromagnetic coil in two-way valve OFF, the valve is closed and the circuit to fuel tank is closed. High-pressure fuel from the common rail flows to the control chamber through orifice 2. 5. Therefore, when high-pressure flows to the control chamber, the hydraulic pressure piston is lowered by pressure difference of movement of hydraulic pressure piston so that injection stops.
T2-3-8