hitachi — EGR (Exhaust Gas Recirculation) Control

SYSTEM / ECM System EGR (EXHAUST GAS RECIRCULATION) CONTROL Purpose: Re-circulates a part of exhaust gas in the intake manifold and combines it with intake-air. Therefore, combustion temperature is lowered and generation of oxide of nitrogen (NOx) is controlled. Operation: EGR Gas Amount Control 1. ECM decides EGR gas amount according to engine speed, fuel flow rate, coolant temperature, atmospheric pressure and intake-air temperature. 2. ECM drives EGR motor, opens EGR valve and sends EGR gas to the intake manifold in response to engine condition so that EGR gas is combined with intake-air. 3. At the same time, ECM detects the opening amount of EGR valve by using EGR motor position sensor.

EGR Gas Cooling EGR gas is cooled by the cooling system in EGR gas passage. Cooled EGR gas is combined with intake-air so that combustion temperature is lowered and NOx is generated lower than normal EGR gas. Lead Valve Lead valve prevents fresh air from entering into the EGR gas passage and EGR gas from flowing in reverse direction. Therefore, EGR gas flows to one direction and EGR gas amount increases. T2-3-12