SYSTEM / Hydraulic System Swing Parking Brake Release Circuit (Refer to the Swing Device in COMPONENT OPERATION.) When operating the front attachment or swing, pilot pressure SH is selected by the shuttle valve in signal control valve and shifts the swing parking brake release spool. As a result, the release signal pressure is supplied to the swing motor and the swing parking brake is released. Travel Motor Swash Angle Control Circuit (Refer to the Travel Device in COMPONENT OPERATION.) Pilot pressure from solenoid valve unit SI controls the travel motor swash angle control valve.
Positioning Circuit (2-Piece Boom Only) (Refer to the Control Valve in COMPONENT OPERATION.) When operating the positioning pedal, pilot pressure from the positioning pilot valve shifts the bypass shut-put valve and the spool in positioning control valve. At the same time, the release signal pressure is supplied to the swing motor and the swing parking brake is released. T2-4-10