SYSTEM / Hydraulic System MAIN CIRCUIT Outline: The main pump (pumps 1 and 2) draws hydraulic oil from the hydraulic oil tank. Pump 1 delivers pressure oil to the 4-spool side in control valve and the positioning control valve (2-piece boom only). Pump 2 delivers pressure oil to the 5-spool side in control valve. Delivered pressure oil is supplied to the motor and cylinder according to operation of the spool in control valve. Return oil from the motor or cylinder returns to the hydraulic oil tank through the control valve and oil cooler.
If oil temperature is low (with high viscosity), and flow resistance is large in the oil cooler, the bypass check valve opens and hydraulic oil directly returns to the hydraulic oil tank. T2-4-12