SYSTEM / Hydraulic System Travel and Arm Roll-In Operation When the arm is rolled in while traveling, pilot pressure shifts the spools of travel, arms 1 and 2. At the same time, pilot pressure shifts the flow combiner valve spool in signal control valve. Pressure oil from the flow combiner valve spool flows to the flow combiner valve and shifts the flow combiner valve. Pressure oil from pump1 drives the right travel motor through right travel spool. At the same time, pressure oil drives the left travel motor through flow combiner valve and left travel spool. Pressure oil from pump 2 flows to the arm cylinder through the arm 1 spool and moves the arm.
Consequently, pressure oil pump 2 is used for the arm. Pressure oil from pump 1 is equally supplied to both left and right travel motors and the machine can travel straight. NOTE: As the right travel circuit is a tandem circuit, pressure oil from pump 1 does not flow to the arm 2 spool. T2-4-18