SYSTEM / Hydraulic System Positioning Circuit (2-Piece Boom Only) Neutral Circuit When the positioning lever is in neutral, pressure oil from pump 1 returns to the hydraulic oil tank through the control valve. Single Operation Circuit Positioning Cylinder During positioning operation, the spools of bypass shut-out valve and positioning control valve are shifted. Pressure oil from pump 1 flows to the spool in positioning control valve and moves the positioning cylinder.
Combined Operation Circuit During combined operation of positioning and boom, arm or bucket, pressure oil from pump 1 flows to the positioning cylinder through the 4-spool side parallel circuit in control valve and the spool in positioning control valve. T178-02-02-014 T2-4-20