hitachi — Main Circuit

SYSTEM / Hydraulic System Auxiliary Circuit When the front attachment as a hydraulic breaker is operated, pilot pressure from the pilot valve for front attachment shifts the auxiliary flow combining valve and bypass shut-out valve. Consequently, the neutral circuit in 4-spool side is blocked. Pressure oil from pump 1 through the auxiliary flow combining valve is combined with pressure oil from pump 2 so that combined pressure oil is supplied to the auxiliary spool. NOTE: During operation of boom raise/lower, arm roll-in/out, bucket roll-in/out and right /left travel, pilot pressure from the signal control valve is supplied to port SN and the auxiliary flow combining valve is not shifted.

(Refer to the Control System in SYSTEM.) T2-4-22