SYSTEM / Hydraulic System Boom Cylinder Bottom Pressure: Low Pressure (Jack-Up) 1. During boom lower operation with the angle between boom and arm at 90 to 110 ° and the bucket on the ground, the boom cylinder bottom pressure becomes low and the boom lower meter-in cut valve is shifted. 2. As boom lower pilot pressure is released, the boom flow control valve (switch valve) and boom flow control valve (poppet valve) are opened. Boom lower pilot pressure moves the boom 2 spool. 3. Pressure oil from pump 1 passes through the boom 1 spool.
Pressure oil from pump 2 through the boom 2 spool is combined with pressure oil from the boom 1 spool and combined pressure oil flows to the boom cylinder rod side. T2-4-26