hitachi — Pilot Shut-Off Circuit (Key Switch: ON)

SYSTEM / Electrical System PILOT SHUT-OFF CIRCUIT (KEY SWITCH: ON) 1. When the pilot shut-off lever is turned ON, the monitor unit connects the ground circuit of pilot shut-off relay and starter cut relay so that the pilot shut-off relay and starter cut relay are turned ON. 2. When the pilot shut-off relay is turned ON, the ground circuit of pilot shut-off solenoid valve is connected, current from fuse #4 turns the pilot shut-off solenoid valve ON and pressure oil from the pilot pump is supplied to the pilot valve. 3. When the starter cut relay is turned ON, key switch terminal ST is disconnected from starter relay 2 terminal S.

Therefore, although the key switch moves to the START position, the engine does not start. T2-5-18