SYSTEM / Electrical System SEUCURITY LOCK CIRCUIT 1. The monitor unit connects the ground circuit of security relay and starter cut relay according to the external warning signal or password input error and the security relay and starter cut relay are turned ON. 2. When the security relay is turned ON, as the ground circuit of pilot shut-off solenoid valve is disconnected, the pilot shut-off solenoid valve is turned OFF so that pressure oil to the pilot valve from the pilot pump is blocked. 3. When the starter cut relay is turned ON, key switch terminal ST is disconnected from starter relay 2 terminal S.
Therefore, although the key switch moves to the START position, the engine does not start. T2-5-20