SYSTEM / Electrical System WORKING LIGHT CIRCUIT Working Light and Cab Light Circuit 1. When the working light switch moves to position 1, monitor unit terminal #B-20 receives the signal. 2. The monitor unit connects the ground circuit of light relay 1. 3. Current from fuse #1 turns light relay 1 ON and turns on the working light and cab light. Boom Light Circuit 1. When the working light switch moves to position 2, monitor unit terminal #A-6 receives the signal. 2. The monitor unit connects the ground circuit of light relay 2. 3. Current from fuse #1 turns light relay 2 ON and turns on the boom light. T2-5-26