SYSTEM / Electrical System WIPER CIRCUIT Intermittent Operation Purpose: Operates the wiper at the intervals set by the wiper / washer switch. Operation: 1. The wiper / washer switch sends the electrical signal on position the INT. in response to the set intervals to the monitor unit. 2. The monitor unit connects the ground circuit at the intervals set by the wiper / washer switch and the wiper relay is turned ON. 3. When the wiper relay is turned ON, the ground circuit of wiper motor is connected. 4. Current from fuse #2 operates the wiper motor and the wiper moves. Washer Operation Purpose: Operates the washer. Operation: 1.
While pushing the wiper/washer switch, the monitor unit receives the electrical signal from the wiper/washer switch. 2. The monitor unit connects the ground circuit of washer relay and the washer relay is turned ON. 3. When the washer relay is turned ON, current from fuse #2 operates the washer motor and washer liquid jets. Fast Speed Middle Speed Slow Speed M178-01-016 Position INT. Set Time Slow 8 seconds Middle 6 seconds Fast 3 seconds T2-5-28