COMPONENT OPERATION / Swing Device Output Curve: Between C and D (Pressure at port BM decreases) When the swing motor rotation is reduced more, pressure at port BM decreases more. At this time, combination valve (B) functions as the following. Operation of Combination Valve (B): 1. When pressure at port BM decreases more, pressure acting on the spring (4) chamber in combination valve (B) also decreases. 2. When pressure in the spring (4) chamber be- comes smaller than the spring (4) force, the spring (4) force moves plunger (3) to the right. 3. At the same time, poppet (1) is pushed to the right by the spring (7) force. 4.
As the pressure difference due to orifice (6) ap- pears, pressure in chamber M increases. 5. Therefore, poppet (1) moves to the right more slowly. 6. Consequently, the clearance between poppet (1) and plunger (3) appears. Pressure oil from port BM acts on poppet (1) and ball (2). 7. Therefore, ball (2) is pushed by poppet (1). Pop- pet (1) and ball (2) compress spring (7) and move to the left in union. 8. As combination valve (B) functions like this, and when aftershock pressure appears pressure is re- lieved promptly. This state continues until aftershock pressure at port AM appears (output curve: between D and E).
Pressure at Port AM Pressure (P) A B C D E T1V1-03-02-001 Time (T) Pressure at Port BM Pressure (P) Time (T) T1V1-03-02-002 Without Combination Valve T3-2-16 Wi A B Co C Va D E Wi Co Va th mbination lve