hitachi — Regenerative Valve

COMPONENT OPERTATION / Control Valve REGENERATIVE VALVE The regenerative valves are provided in the boom lower, arm roll-in and bucket roll-in circuits. The regenerative valve increases cylinder speeds in order to prevent cylinder hesitation, and improves machine controllability. Boom Regenerative Valve and Bucket Regener- ative Valve NOTE: Operational principle of the boom regenerative valve is identical to that of the bucket regenerative valve. Therefore, the bucket generative valve is explained as an example. Operation 1. When the bucket is rolled in, the return oil from the cylinder rod side (bottom side of the boom cylinder) enters hole in the spool and acts on the check valve. 2.

At this time, if pressure in the cylinder bottom side (rod side of the boom cylinder) is lower than the rod side, the check valve is opened. 3. Then, return oil from the cylinder rod side flows into the bottom side together with oil delivered from the pump and the cylinder speed increases. 4. When the cylinder is moved full stroke or the digging load increases, pressure in the cylinder bottom side circuit increases more than the rod side. Therefore, the check valve is closed and regenerative operation stops. Pressure Oil from Pump 1 Bucket Cylinder Check Valve T176-03-03-027 T3-3-32