GENERAL / Component Specifications ALTERNATOR Type ............................................................... Regulator Integrated AC Type, Brushless Voltage / Output ............................................. 24 V / 50 A (Brushless) SUPERCHARGING SYSTEM Type ...............................................................
Exhaust-Turbocharger Type RHF5 Type without Weight Gate FUEL SYSTEM Type ...............................................................Common Rail Type HP3 Type Governor ........................................................Electronic All Speed Control Injection Nozzle ............................................Electrical Multi-Hole Injector PERFORMANCE IMPORTANT: This list shows design specifications, which are not servicing standards. Fuel Consumption Ratio................................. 220 ± 10 g/kW/h (299 ± 13.5 g/PS h) at 90.2 +1.5 –3.9 kW / (at Full Load:2200 min -1 ) 220 ± 10 g/kW/h (299 ± 13.5 g/PS h) at 83 ± 3.3 kW / (at Working Load:
2000 min -1 ) Maximum Output Torque................................ 402 ± 20 N m (41 ± 2 kgf m) at approx. 1800 min -1 Compression Pressure .................................. 3 MPa (31 kgf/cm 2 ) at 200 min -1 Valve Clearance (Inlet / Exhaust)................... 0.15 / 0.15 mm (when cool) No Load Speed ............................................. Slow: (at Full Load: 800 ± 20 min -1 ) Fast: (at Full Load: 2200 ± 20 min -1 ) (at Working Load: 2000 ± 20 min -1 ) T1-3-2