COMPONENT OPERATION / Travel Device TRAVEL MODE CHANGE The tilt angle of swash plate (7) is changed by piston (8) movement in order to select the travel mode. Slow Speed Mode 1. When the travel mode switch is in the SLOW po- sition, MC (main controller) does not send the signals to solenoid valve unit (SI) so that pilot pressure is not routed to pilot port (1). Spool (2) is kept raised by spring (3). 2. Therefore, piston (8) is not acted by pressure oil and secured at the maximum swash angle. 3. Thereby, the plunger (6) stroke is increased and the travel motor rotates at slow speed. T3-5-8