hitachi — Travel Mode Change

COMPONENT OPERATION / Travel Device Fast Speed Mode 1. When the travel mode switch is in the FAST posi- tion, MC sends the signals to solenoid valve unit (SI) in response to travel loads. (Refer to “Travel Motor Swash Angle Control” / SYSTEM / Control System.) 2. Pilot pressure is routed from pilot port (1) and moves spool (2) downward. 3. Pressure oil in high-pressure motor port (AM or BM) acts on piston (8) through orifice (5). 4. Piston (8) pushes swash plate (7) so that the swash angle of swash plate (7) is reduced. Thereby, as the plunger (6) stroke is reduced, the travel motor rotates at fast speed. T3-5-10