hitachi — Shockless Valve

COMPONENT OPERTATION / Signal Control Valve SHOCKLESS VALVE The shockless valve is provided in the boom raise circuit and functions during boom lowering operation. During Boom Raising Operation: 1. Boom raise pilot pressure oil is routed into port A and acts on the spool. 2. Immediately after operation is started, low pilot pressure oil flows into the spring B chamber through clearance between spool and housing. At the same time, pilot pressure oil flows to port 1 through inner passage 2. 3. When pilot pressure increases, pressure in the spring B chamber increases, and the spool pushes spring A and moves to the left. 4.

As the spool is moved, port A is connected to port 1 and pressure in port 1 increase so that the spool in control valve is moved. Port A Spool Spring B T1V1-03-06-003 Port 1 Port A Spring B T1V1-03-06-002 Port 1 T3-6-10 ring A Spool S