COMPONENT OPERATION / Others (Undercarriage) TRACK ADJUSTER The track adjuster located on the side frame is composed of spring (7) and adjuster cylinder (5). Spring (7) absorbs loads applied to the front idler. Adjuster cylinder (5) adjusts track sag. Grease is applied through grease fitting into chamber A of adjuster cylinder (5), pushes piston rod (2) out and decreases track sag. Loosen valve (12) 1 to 1.5 turns counterclockwise and release grease in order to increase track sag. CAUTION: Do not loosen valve (12) quickly or loosen too much as high-pressure grease in adjusting cylinder (5) may spout out. Loosen valve (12) carefully while keeping body parts and face away from valve (12).
Do not loosen the grease fitting. Grease Fitting 12 Grease Discharge Hole W8HY-04-03-001 W1V7-03-04-002 1 - Holder 4 - U-Ring 7 - Spring 10 - Plug 2 - Piston Rod 5 - Adjuster Cylinder 8 - Spacer 11 - Nut 3 - Dust Seal 6 - Rod 9 - Washer 12 - Valve T3-8-3 2 5 A 7 6 11 12 1 3 4 8 9 10 2 5 A 7 6 11 12