SYSTEM / Controller Secondary Crusher Control (Optional) As for the machine equipped with the secondary crusher, when secondary crusher 1 is selected on the monitor unit or is set by Dr. ZX, MC drives the auxiliary flow combining solenoid valve. When operating the secondary crusher, pilot pressure from the attachment pilot valve shifts the bypass shut-out valve and the auxiliary flow combining valve through the auxiliary flow combining solenoid valve. When pressure oil from pump 1 is combined with pressure oil from pump 2 through the auxiliary flow combining valve. Therefore, combined pressure oil flows to the auxiliary spool and speed operating the secondary crusher increases.
When operating combined operation of arm roll-out, arm roll-out + boom raise, swing or travel and secondary crusher, MC drives the auxiliary flow rate control solenoid valve according to the signals from pressure sensors (auxiliary, arm roll-out, boom raise, swing or travel) so that pressure oil to the secondary crusher is restricted. Primary Crusher Control (Optional) As for the machine equipped with the primary crusher, when primary crusher 1 is selected on the monitor unit or is set by Dr. ZX, MC drives the auxiliary flow combining solenoid valve.
When operating the primary crusher, pilot pressure from the attachment pilot valve shifts the bypass shut-out valve and the auxiliary flow combining valve through the auxiliary flow combining solenoid valve. When pressure oil from pump 1 is combined with pressure oil from pump 2 through the auxiliary flow combining valve. Therefore, combined pressure oil flows to the auxiliary spool and speed operating the primary crusher increases.
When operating combined operation of arm roll-out, arm roll-out + boom raise, swing or travel and primary crusher, MC drives the auxiliary flow rate control solenoid valve according to the signals from pressure sensors (auxiliary, arm roll-out, boom raise, swing or travel) so that pressure oil to the primary crusher is restricted. As the primary crusher is heavier than the secondary crusher, when operating combined operation of arm roll-out or arm roll-out + boom raise and primary crusher, MC restricts flow rate of the auxiliary flow rate control solenoid valve further, and gives priority to operation of arm roll-out or arm roll-out + boom raise. T2-1-16