hitachi — Monitor Unit

SYSTEM / Controller Auto-Idle Display (1) When the switch is turned ON, the data is displayed. When the key switch is turned ON with the auto-idle switch ON, the data blinks for 10 seconds. Overload Alarm (2) 1 3 4 T1V1-05-01-008 2 T1V1-05-02-002 The system measures the load of suspended load from the bottom pressure of boom cylinder. When overload is detected, an alarm is displayed. (Refer to T2-1-44.) Glow Display (3) While ECM is supplying current to the glow plug, the date is displayed according to the signal from ECM. Fuel Consumption Gauge Display (4) IMPORTANT: The values on fuel gauge are references and different from the measured values.

Fuel consumption is displayed according to the signal from ECM, which is received through MC by using CAN bus line. T1V1-05-01-128 T2-1-28